Oxycell OS/O2™ is the world's most advanced hyperbaric control system — preset protocols built on decades of clinical research, run from dual digital panels inside and out.
Programmed session protocols — pick one, press start, and breathe.
Mechanical gauges inside and out plus a digital panel — pressure you can always see.
Automatic pressure regulation and smart door sensors ensure safe, secure operation at all times.
Digital control panels inside and outside — full control from the mattress.
Explore the OxyPro Platinum cabin in detail from every angle.
Built to the highest international manufacturing standards, ensuring safety, quality, and reliability you can trust. A hyperbaric chamber is a pressure vessel that holds a person — so every Oxycell is built to the ASME Boiler & Pressure Vessel Code, independently inspected and stamped before it ever ships.
ASME certification ensures our chambers meet the rigorous safety requirements set by the American Society of Mechanical Engineers — the same standards used in aerospace and nuclear industries. Independent, third-party proof of structural integrity.
Triple ISO certified for quality management, environmental standards, and medical device manufacturing. These certifications demonstrate commitment to consistent quality and continuous improvement.
CE marking confirms compliance with European health, safety, and environmental protection standards — recognized globally as a mark of product quality and regulatory compliance.
The premium systems built into every OxyPro Platinum as standard — engineered for effortless, whisper-quiet lie-down sessions.
Full session control from inside or outside the chamber.
Mechanical interior/exterior gauges plus a digital readout.
Under 45 dB — quieter than normal conversation.
Integrated climate module, 41–60°F operating range.
Our fully loaded performance and experience upgrades package.
Automated oxygen/air protocol optimization, every session.
Medical-grade photobiomodulation at 660 / 850nm.
Premium fiber-optic starry ceiling.
A dedicated all-in-one operating unit for advanced session control.
The Breathe-In Breathing System (BIBS) upgrade delivers inhale-activated oxygen with exhalation expelled outside the chamber — stepping the Platinum up from 10 to 20 L/min.
93–98% pure oxygen delivered straight to your breathing zone.
True Breathe-In-Breathing-System technology eliminates O₂ overflow.
Exhaled CO₂ is expelled outside the chamber via the exhalation tube.
Easily switch between the BIBS mask and a standard cannula or rebreather mask.
* Optional upgrade — $4,000 per seat, with a 20 L/min oxygen concentrator required for each occupant using the BIBS mask system.
Your chamber is delivered, installed, and commissioned for you — then supported for life. OxyCare+ covers everything from the truck to your first session.
Fully insured, crated freight delivery coordinated to your site.
We assemble, position, and commission your chamber so it's ready on day one.
A guided walkthrough of operation, protocols, and safety for you and your staff.
Priority support for the life of your chamber — a direct line whenever you need us.
When a site calls for more than a standard delivery — restricted access, upper-floor placement, or sectional units — we coordinate the equipment and crews to place your chamber safely.
For restricted ground access or upper-floor placement, a crane lifts the chamber into position.
Heavy-equipment handling moves and positions the unit on-site wherever ground access allows.
Sectional units can travel through building elevators for interior, upper-floor installation.
Please note: Crane and rigging services, unless explicitly included in your estimate, require additional cost and advance approval. Upper-floor (non-ground) locations or two-piece sectional assemblies may require additional lead time to secure equipment and qualified crews for advanced assembly and rigging.
The Platinum's standard configuration runs on just two cords — the simplest install in the Oxycell range. BIBS upgrade: $4,000 per seat with a 20 L/min concentrator.
Power at a glance: the OxyPro Platinum runs on standard 110 V / 60 Hz household power — the lightest electrical footprint in the range. The standard configuration uses just two power cords (one for the all-in-one unit, one for the climate module), each on its own dedicated circuit; Protocol and BIBS configurations add one more. Our team confirms your electrical setup before delivery.
The Platinum has the simplest electrical needs in the range: standard 110V household power on just two cords (one for the all-in-one unit, one for the climate module), each on its own dedicated circuit. Protocol and BIBS configurations add one more.
The Platinum is a 34-inch-diameter, 88-inch-long lie-down chamber at just 573 pounds — the easiest Oxycell hard-shell to place. Our team reviews your delivery path before your order ships.
Yes. Dual digital control panels — inside and outside — give you full control of every function from the mattress.
Under 45 decibels — quieter than normal conversation. Read, relax, or sleep through your session.
The standard concentrator delivers 10 L/min at 93–98% purity. The optional BIBS mask upgrade steps that up to 20 L/min of inhale-activated oxygen.
Routine maintenance includes regular filter replacement, seal inspection, and system calibration. We provide comprehensive training and ongoing support.
The Oxycell range spans seated and lying chambers for the home, clinic, and wellness center.
Be among the first to experience the next generation of hyperbaric oxygen therapy. Speak with our team to secure your order.
